New Craft Santa Claus Wiper Car Stickers without Straps Direct Stickers Wiper Christmas Elderly Car

OPP bag packaging, weight 40g, new craft

no glue left, waterproof, sunscreen, anti-fading high thickness stickers, can be used repeatedly

provide customization, low price, want to buy as soon as possible.

All patterns can be made, please contact Customer Service for details

i. Installation method of small car stickers (dry stickers):

1. Clean the car body and keep it dry.

2. Determine the position to be pasted. Under normal circumstances, slowly stick it on one side, scrape it with tools, and peel the bottom paper.

3. If the figure is really small, you can also tear off all the stickers and paste them, but be careful not to accidentally stick them.

4. After pasting, repeatedly scrape and press it several times. Tear off the transparent transfer film.

5. Use an art knife to draw a knife on the car door and sewing, and wrap the door inside.

6. Do not let the car sticker and the car body have any separation or bulge.

II. Installation method of large car stickers (wet paste method): Tools: rags, sprinklers, scrapers or credit cards

1. Clean the car body and evenly sprinkle water on the part of the car body to be pasted-to reduce the viscosity of the sticker and facilitate the adjustment of the position.

2. Determine the position to be pasted. Slowly stick it on one side, gently scrape it with tools, and peel the bottom paper.

3. In case of door handle or anti-scratch strip, cut the materials and wrap them in according to the situation.

4. Adjust appropriately. After making sure that the graphic approximate location is correct, wipe off water and bubbles repeatedly.

5. Use an art knife to draw a knife on the car door and sewing, and pack it inward.

6. Do not let the car sticker and the car body have any separation or bulge.

7. Try to dry the water in the car stickers, and heat and dry them properly if necessary. According to the weather, wash the car in a day or two.